Heating/cooling zone build-up editor: differenze tra le versioni

Da HelpSystem.
Vai alla navigazione Vai alla ricerca
Nessun oggetto della modifica
Etichette: Ripristino manuale Annullato
Nessun oggetto della modifica
Etichette: Ripristino manuale Annullato
Riga 67: Riga 67:


<!-- Do not write text below this tag -->
<!-- Do not write text below this tag -->
<br class="iwlinks"/>[[pl:Jak wyeliminować: "Maksymalne obciążenie użytkowe %.1f przekracza wartość dopuszczalną %.1f dla wybranej konstrukcji podłogi (izolacji). Nie udało się dobrać żadnego wariantu izolacji"|Jak wyeliminować: "Maksymalne obciążenie użytkowe %.1f przekracza wartość dopuszczalną %.1f dla wybranej konstrukcji podłogi (izolacji). Nie udało się dobrać żadnego wariantu izolacji"]][[en:How to eliminate: "Max. working load %.1f exceeds permissible value %.1f for selected floor construction (insulation). Insulation was not determined"|How to eliminate: "Max. working load %.1f exceeds permissible value %.1f for selected floor construction (insulation). Insulation was not determined"]][[zh-cn:如何删除: "地面最大工作载荷 %.1f 超过了选定的地面结构（绝热层）的允许值 %.1f，绝热材料未确定"|如何删除: "地面最大工作载荷 %.1f 超过了选定的地面结构（绝热层）的允许值 %.1f，绝热材料未确定"]][[bg:Редактор на подово покритие на отоплителна/охладителна зона|Редактор на подово покритие на отоплителна/охладителна зона]]
<br class="iwlinks"/>[[pl:Edytor konstrukcji płaszczyzny grzewczo-chłodzącej|Edytor konstrukcji płaszczyzny grzewczo-chłodzącej]][[en:Heating/cooling zone build-up editor|Heating/cooling zone build-up editor]][[fa:ویرایشگر ساختار کف مناطق گرمایش/سرمایش|ویرایشگر ساختار کف مناطق گرمایش/سرمایش]][[zh-cn:供热/供冷区的构造编辑器|供热/供冷区的构造编辑器]][[bg:Редактор на подово покритие на отоплителна/охладителна зона|Редактор на подово покритие на отоплителна/охладителна зона]]

Versione delle 23:01, 7 mag 2026


Prodotto InstalSystem 5
Tipo di articolo FUNCTION AND TOOL
Contenuto attuale per la versione Version GOLD Rev. 16.0


Description

This article describes possibilities of editing structural, thermal and operational data of heating/cooling zones and structural partitions, upon which they are located.

Location in the program

Heating/cooling zone build-up editor is situated in: Tabella dati after having ticked: Zona della superficie di riscaldamento/raffrescamento and checked the drop-down list Struttura del pavimento riscaldante \ Struttura della parete di risc./raffr. \ Struttura del soffitto di risc./raffr..

1. Heating/cooling zone build-up


Example of use

Presentation of data in the heating/cooling zone build-up editor

  1. The Struttura del pavimento riscaldante \ Struttura della parete di risc./raffr. \ Struttura del soffitto di risc./raffr. field presents overall thickness of the heating/cooling zone as well as overall thermal resistance.
  2. Having opened the editor, the user gains access to particular data, on the basis of which overall values are calculated:
    • Overal thickness of heating/cooling zone layers.
      3. Spessore dello strato

    • Thermal resistance of particular layers of a given heating/cooling zone along with structural partition thermal resistance.
      4. Resistenza termica dello strato


      5. Spessore generale struttura i Resistenza termica degli strati

After data modification in the editor window, it is necessary to recalculate the project to update all values.

Heating/Cooling zone build-up edition

Rivestimento superiore

6. Rivestimento superiore


  1. Rivestimento predefinito originates from Dati generali for Tipo stanza elements.
    7. Rivestimento predefinito

  2. Rivestimento superiore may be changed for each Zona della superficie di riscaldamento/raffrescamento element.
    8. Rivestimento superiore


Spessore totale del massetto/intonaco

9. Spessore totale del massetto/intonaco



Spessore totale del massetto/intonaco, in case of the Auto setting, may change according to the Carico di lavoro massimo value (), within limits allowed by the producer. The user may change thickness, also in the limits allowed by the system producer, while taking into consideration all other system data.
Spessore del massetto/intonaco sopra il tubo Su is always calculated automatically by the program, and it cannot be changed manually.

Pannello

10. Pannello



The user may change the structural panel if:
  1. there are more structural panels than one for a given fastening method.
    11. Pannello - choose from Dati generali


  2. In Tabella dati of the element Zona della superficie di riscaldamento/raffrescamento, the user ticked off Dati generali std. - otherwise, the field is available only in the Auto status, with no edition possibilities.
    12. Pannello - selection in Tabella dati


Opzioni isolamento

13. Opzioni isolamento


  1. Automatico
    The program selects Opzioni isolamento with minimal resistance according to EN 1264: 1:2011 2:2013 3,4:2009 5:2008 for a given structural panel and upon the Temperatura dall'altro lato value.
    14. Opzioni isolamento - Auto


  2. Manuale
    It is possible to choose Opzioni isolamento from the catalogue or to define one's own by choosing particular insulation layers (up to 5 layers).
    15. Opzioni isolamento - Manuale


Disegno intersezione struttura

The user may change the way in which the structure cross section drawing is presented.

16. Disegno intersezione struttura



Structural and heating partition data editing

17. Structural and heating partition data


  1. The program does not select elements among Definizione delle strutture from the I calcoli termici dell'edificio scope, and they should be corrected manually.
  2. From Dati generali, only the Lower slab thickness, dpav value is drawn.
    18. Lower slab thickness, dpav


Estratto da "https://it.help.instalsoft.com/index.php?title=Heating/cooling_zone_build-up_editor&oldid=25587"